Material
EMC-YJ Cable Gland
EMC-YJ Shielded Metal Cable Gland
Considering the electromagnetic interference between
different electrical equipment and ensuring the normal operation of different
electrical equipment, most countries in the world have developed
electromagnetic compatibility standards for electrical equipment. The EMC-YJ
shielded cable gland can ensure good electrical contact between the shielding
layer of the shielded cable and the equipment housing or electrical cabinet,
achieve common grounding, and ensure good protection level.
Quotation
Brass Nickel plating
IP Grade
IP68
Operating temperature
Static -40°C to 120°C
Thread Specifications
Metric threads, PG threads, G(PF) threads, NPT threads;
Material: The outer metal is brass plated with nickel, the inner core sleeve is nylon PA66, and the sealing material is nitrile rubber NBR.
Protection level: When using the appropriate O-ring seal within the specified cable outer diameter, the protection level can reach IP68.
Temperature range:
- Static: -40℃ to 100℃, short-term up to 120℃.
- Dynamic: -20℃ to 80℃, short-term up to 100℃.
Application: Suitable for electrical control equipment and electronic equipment that require electromagnetic compatibility.
More options: Explosion-proof, small snap rings, etc., are available.
Usage: Break a small section of the outer sheath of the shielded cable and cut off the shielded layer. Fold a small section of the shielded layer conductor outside of the inner core sleeve of the connector, with a length longer than the position of the sealing ring. Then place it into the cable joint and tighten it. It is recommended to scrape off the paint at the contact of the cabinet and the cable joint or nut to ensure good conductivity.
